Allergen, Fungi and Molds, Fusarium solani IgE
Also known as: FUSARIUM
Use
The Allergen, Fungi and Molds, Fusarium solani IgE test is used to detect and quantify the presence of specific IgE antibodies against the mold Fusarium solani in the patient's serum. This test aids in diagnosing allergenic sensitization to this mold and is helpful in the assessment of allergic conditions such as allergic rhinitis or asthma that might be exacerbated by exposure to Fusarium solani.
Special Instructions
Ensure adequate volume for allergen testing. The test is performed at Eurofins Viracor, LLC, and requires separate specimens if multiple tests are ordered. It is not performed at ARUP Laboratories.
Limitations
This test has been developed and its performance characteristics determined by Eurofins Viracor. It has not been cleared or approved by the U.S. Food and Drug Administration. Lipemic specimens are unacceptable as they may interfere with test results.
New York Approved
Methodology
Immunoassay (ELISA)
Biomarkers
Result Turnaround Time
3-6 days
Related Documents
For more information, please review the documents below
Specimen
Serum
Volume
0.5 mL plus 0.1 mL per additional allergen
Minimum Volume
0.34 mL plus 0.04 mL per additional allergen
Container
Plain Red or Serum Separator Tube (SST)
Collection Instructions
Separate from cells ASAP or within 2 hours of collection. Transfer serum to an ARUP Standard Transport Tube.
Storage Instructions
Room temperature. Also acceptable: Refrigerated or frozen.
Causes for Rejection
Lipemic specimens
Stability Requirements
| Temperature | Period |
|---|---|
| Room Temperature | 1 month |
| Refrigerated | 1 month |
| Frozen | 1 year |